Wind Hybrid Turbine and Solar Power Solar Street Light

Product video

Product Description

Because it is not affected by power supply, no ditching and burying lines, no consumption of conventional power, as long as the wind is sufficient, it can be installed on the spot and other characteristics, so it has been widely concerned by people, and because it does not pollute the environment, it is called green environmental protection products. Wind power street lights are suitable for the lighting of parks, roads and lawns in coastal areas, and can also be used for small population distribution density, inconvenient transportation, underdeveloped economy, lack of conventional fuel, difficult to use conventional energy to generate electricity, but wind resources are rich in areas to solve the problem of household lighting in these areas.

Solar lighting system solutions

1. What information do you need to provide us,for working out the best praposal for a solar lighting system?
(1)The place of installation; we need to check and choose the riaht confiauration accordina to the sunliaht peak value in the local area.
(2)The operating hours reguired each day (e. g. 5 hours or 10 hours).
(3)How may rainy days willhappen continuously in rainy season (e. g. 3 days or 4 days) in order to ensure the road lamps can work normally.
(4)Height of the columns and the width of the road.
(5)Requirements for the brightness.

2. What is the sunlight peak value?
The sunlight peak value is the unit intensity of sunlight reaching the surface of the earth each hour. With this 'value, the climate and weather canbe analvzed. The maximum intensity of sunlight should happen in at noon and within 3-4 hours belore and aller the noon (dilerent from region toregion). This period is the best period for the charging of solar cell panels (of course, the hot summer period is an exception).

3. How could the solar-energy road lamps know the time to switch-off and switch-on?
We use the lilght& time-controlled inteligent waterproof controler. With this kind of controler, we can make whichever kind of control we need inorder to maintain the switch-on and switch-of control according to requirements. The controller is something like the heart of a human body. l is con-nected with the solar-energy cell panel, the storage battelV and the lighting source. When the controler has detected the votage of the cell paneldeclined to a certain set level, it wil give order to the lighting source to start lighing. When the settime has expired (e. g. 10 hours). l wil switch off heiohtina source. This is the intelilent lioht control for switch-on and time control for switch of. Besides this, the controller has many other functions. Folexample it can protect the storage baltey against overcharge or over. discharge. in order to protect the storage baltery againsl damage.

4. lf appear a few consecutive rainy days to do, and it can work normally?
lfin recent days the weather is not very good, cloudy or rain, that you also don't worr3t, because we also takes into account, whenwe made the plan for you, can, if you prepare in advance 3 days or 5 days with you, as long as itis regular, continuous rainy day can last lighlting. but remember to do.
Want to consider constancy, the number of days in a row, the individual consecutive days more according to the individual js not recommended to design, because that your costs will increase a lot. .